7 Heat Pump Tips For New Users
A heat pump is not a complicated device. It has the function of providing heat from one source to the destination. A heat pump is an important part of a cooling and heating system. It may be referred to an air source. A heat pump that is working properly and is well maintained will even lower your energy bill. A heat pump can actually cool and heat. A heat pump can use energy and it will very simply move the heat from one location to another area. It will pull the heat from the ground or even the air and will then heat a building. It does not require a lot of energy to do this. This is the basics of what a heat pump does.
Heat Pump User Tips:
- Use auto fan mode, just set the pump to “auto fan” mode
- Optimize air flow direction, if you direct the cool air up to the ceiling in the summer and warm air down toward the floor in the winter it will maximize your benefits
- You can maximize the heating zone, do this by keeping doors open to the other rooms. This will allow the heat pump will heat more space
- Keep dust filters clean, this will keep it working at its maximum level.
- Replace and clean allergen cartridges,It is a good idea to follow the recommended cleaning and replacing recommendations of the manufacturer.
- Outdoor units should be cleaned by a professional, An outdoor unit is cleaned every year or every two years.
A well maintained heat pump can actually cut your energy bill by 50 percent. A well maintained pump will provide high efficiency heating without ducts. They are adaptable along with being cost effective. There are a number of varieties to choose from. It is not difficult to maintain a heat pump. It can be used for cooling and heating a building. These 7 tips offered should help you to be familiar with a heat pump.
Want to install a heat pump in your Greenwood home? Call Johnson Heating & Cooling at (317) 881-7738 today for quick and reliable services.